Страница 1 из 1

Centos 6.2 PPPoE

СообщениеДобавлено: 13 май 2012, 07:31
pep3l
Конфигурация:
ПК со свежеустановленной CENTOS 6.2
Шнур провайдера АВК, вставленный в сетевую карту)
установленный пакет rp-pppoe

После установки пакета, активации сетевой карты, чтобы включалась сама при загрузке, а также настройки pppoe-setup,
в ifconfig -a мы видим что соединение поднято, назначен айпишник от сервера АВК, но пинги не идут.
Помогите настроить инет в CENTOS:D

PS Аналогичным способом всем работает в debian с пакетом pppoeconf

Помогите пожалуйста!

Re: Centos 6.2 PPPoE

СообщениеДобавлено: 13 май 2012, 08:58
KDE
какой IP получаете? PPPoE настраивали с помошью adsl-setup ? Пинг запускаете на IP или доменные имена? Попробуйте пингануть по IP допустим mail.ru 94.100.191.202.

Re: Centos 6.2 PPPoE

СообщениеДобавлено: 13 май 2012, 10:20
pep3l
какой IP получаете? PPPoE настраивали с помошью adsl-setup ? Пинг запускаете на IP или доменные имена? Попробуйте пингануть по IP допустим mail.ru 94.100.191.202.


- ip получаю 192.168.64.2 (это мой айпи всегда при авторизации по PPPoE)
- PPPoE настраивал через rp-pppoe
- adsl-setup не смог поставить, так как не знаю название пакета. (судя по гуглу, режим настройки у rp-pppoe и adsl-setup одинаковый)
- после установки rp-pppoe, при вводе adsl-setup - пишет неизвестная команда, зато отлично работает команда pppoe-setup, с помощью которой и настраивал соединение.

Привожу пример настройки:
Код: выделить все
LOGIN NAME

Enter your Login Name (default root): “укажите Ваш логин на подключение”

Вввожу client-x.xx

INTERFACE

Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): “укажите имя сетевого интерфейса,
подключенного к розетке ( обычно это eth0 )”

Нажимаю enter, так как к eth0 подключен АВКашный кабель

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)

NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.

Enter the demand value (default no): “укажите yes,
если хотите, чтобы соединение подключалось автоматически при запросе.
В противном случае укажите no”

выбираю yes
DNS

Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: “укажите IP адрес DNS сервера (217.170.80.83)”

Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
Enter the secondary DNS server address here: “укажите IP адрес
альтернативного DNS сервера (81.222.223.6)”

нажимаю enter

PASSWORD

Please enter your Password: “введите ваш пароль”

Please re-enter your Password: “подтердите ваш пароль”

ВВОЖУ и подтверждаю свой пароль

USERCTRL

Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): “введите yes,
если вы хотите, чтобы позволить обычному пользователю ( не root )
включать и выключать соединение”

нажимаю yes

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:

0 - NONE: This script will not set any firewall rules.  You are responsible

          for ensuring the security of your machine.  You are STRONGLY

          recommended to use some kind of firewall rules.

1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation

2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway

                for a LAN

Choose a type of firewall (0-2): “если Вы опытный пользователь,
то решайте сами какой тип фаервола Вам подходит, или 1 ( стандартный firewall ),
или 2 ( для шлюза ) иначе выберете тип “0””

выбираю 2, так как есть еще eth1

** Summary of what you entered **

Ethernet Interface: eth0

User name:          “ваш логин”

Activate-on-demand: No

Firewalling:        yes

User Control:       yes

Accept these settings and adjust configuration files (y/n)? y

Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0

Adjusting /etc/resolv.conf

  (But first backing it up to /etc/resolv.conf.bak)

Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets

  (But first backing it up to /etc/ppp/chap-secrets.bak)

  (But first backing it up to /etc/ppp/pap-secrets.bak)

 

Congratulations, it should be all set up!

Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'

to bring it down.

Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'

to see the link status.
 



- пинг не идет ни на доменные имена, ни айпи адреса. (ping ya.ru или ping 8.8.8.8 висит на строчке пинг, пока не прервешь команду)

Re: Centos 6.2 PPPoE

СообщениеДобавлено: 13 май 2012, 10:52
Савин Сергей
pep3l писал(а):- ip получаю 192.168.64.2 (это мой айпи всегда при авторизации по PPPoE)
- PPPoE настраивал через rp-pppoe
- adsl-setup не смог поставить, так как не знаю название пакета. (судя по гуглу, режим настройки у rp-pppoe и adsl-setup одинаковый)
- после установки rp-pppoe, при вводе adsl-setup - пишет неизвестная команда, зато отлично работает команда pppoe-setup, с помощью которой и настраивал соединение.

Привожу пример настройки:
Код: выделить все
LOGIN NAME

Enter your Login Name (default root): “укажите Ваш логин на подключение”

Вввожу client-x.xx

INTERFACE

Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): “укажите имя сетевого интерфейса,
подключенного к розетке ( обычно это eth0 )”

Нажимаю enter, так как к eth0 подключен АВКашный кабель

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)

NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.

Enter the demand value (default no): “укажите yes,
если хотите, чтобы соединение подключалось автоматически при запросе.
В противном случае укажите no”

выбираю yes
DNS

Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: “укажите IP адрес DNS сервера (217.170.80.83)”

Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
Enter the secondary DNS server address here: “укажите IP адрес
альтернативного DNS сервера (81.222.223.6)”

нажимаю enter

PASSWORD

Please enter your Password: “введите ваш пароль”

Please re-enter your Password: “подтердите ваш пароль”

ВВОЖУ и подтверждаю свой пароль

USERCTRL

Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): “введите yes,
если вы хотите, чтобы позволить обычному пользователю ( не root )
включать и выключать соединение”

нажимаю yes

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:

0 - NONE: This script will not set any firewall rules.  You are responsible

          for ensuring the security of your machine.  You are STRONGLY

          recommended to use some kind of firewall rules.

1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation

2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway

                for a LAN

Choose a type of firewall (0-2): “если Вы опытный пользователь,
то решайте сами какой тип фаервола Вам подходит, или 1 ( стандартный firewall ),
или 2 ( для шлюза ) иначе выберете тип “0””

выбираю 2, так как есть еще eth1

** Summary of what you entered **

Ethernet Interface: eth0

User name:          “ваш логин”

Activate-on-demand: No

Firewalling:        yes

User Control:       yes

Accept these settings and adjust configuration files (y/n)? y

Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0

Adjusting /etc/resolv.conf

  (But first backing it up to /etc/resolv.conf.bak)

Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets

  (But first backing it up to /etc/ppp/chap-secrets.bak)

  (But first backing it up to /etc/ppp/pap-secrets.bak)

 

Congratulations, it should be all set up!

Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'

to bring it down.

Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'

to see the link status.
 



- пинг не идет ни на доменные имена, ни айпи адреса. (ping ya.ru или ping 8.8.8.8 висит на строчке пинг, пока не прервешь команду)


Добрый день.

Какие адреса ДНС серверов у Вас прописаны? Исходя из кода, который Вы предоставили:

Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: “укажите IP адрес DNS сервера (217.170.80.83)”

Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
Enter the secondary DNS server address here: “укажите IP адрес
альтернативного DNS сервера (81.222.223.6)”

чтобы получать автоматически ДНС - надо вписать 'server'

Если не получится настроить через rp-pppoe, здесь настройка адсл, со всеми подробностями.

Re: Centos 6.2 PPPoE

СообщениеДобавлено: 13 май 2012, 11:57
pep3l
Я просто нажимаю enter, чтобы получить автоматичски ДНС, пробовал вводить вручную АВКашные и Гугловские - результата нет.
Попробую ваш метод с АДСЛем - отпишусь по результатам не раньше вторника-среды

Re: Centos 6.2 PPPoE

СообщениеДобавлено: 23 май 2012, 10:25
pep3l
Так и не настроил. Вернулся к debian